Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

La tecnología de fabricación de filamentos fundidos (FFF) se utiliza ampliamente en procesos de fabricación aditiva industriales y de escritorio . Esta tecnología implica fundir y extruir un filamento termoplástico a través de una boquilla calentada para crear capas fusionadas que forman un objeto t...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autor principal:	Balderrama Armendariz, Cesar Omar
Altres autors:	Garcia Pereyra, Rutilio, Maldonado-Macías, Aide Aracely, Eric, MacDonald, Aguilar-Duque, Julian I
Format:	Artículo
Idioma:	en_US
Publicat:	2024
Matèries:	Tecnología Filamentos fabricación info:eu-repo/classification/cti/7
Accés en línia:	https://doi.org/10.1016/j.mfglet.2024.05.004 https://www.sciencedirect.com/science/article/abs/pii/S2213846324000427
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Optimización del trayecto de extrusor en la manufactura de elementos usando Fabricación por Filamento Fundido.
per: Aguilar Duque, Julián Israel
Publicat: (2025)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Publicat: (2020)

Geometric considerations for the 3D printing of components using fused filament fabrication
Publicat: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Publicat: (2021)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
per: Balderrama Armendariz, Cesar Omar
Publicat: (2019)

Additive manufacturing: Fused deposition modeling advances
per: Aguilar Duque, Julian Israel
Publicat: (2018)

José Luis Ortega Lara explica la labor de los alumnos (Programa Imágenes)
per: Universidad Autónoma de Ciudad Juárez
Publicat: (2016)

Optimizing the user experience of additive manufacturing products through material driven design
per: Balderrama Armendariz, Cesar Omar
Publicat: (2024)

Propuestas de clasificación del plagio y otros actos de conducta inapropiada en la elaboración de escritos académicos
per: Guadalupe, Esquivel
Publicat: (2020)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Emotional salary: an alternative solution for labor performance improvement
per: Ana Karen Espinoza Saldívar, et al.
Publicat: (2020)

Prototipo de una máquina para la fabricación de piezas con geometrías en dos dimensiones
per: Juan Carlos Juárez, et al.
Publicat: (2016)

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process
per: Balderrama Armendariz, Cesar Omar
Publicat: (2024)

Effect of Thermal Barrier Coating on the Thermal Stress of Gas Microturbine Blades and Nozzles
per: Tenango-Pirin, Oscar
Publicat: (2020)

Análisis Especialista Seis Sigma y Cultura Organizacional en la relación con la Estrategia Seis Sigma y la Competitividad
per: Corona Cortez, Rosa Elba
Publicat: (2017)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
per: Flores‑Hernández, Cynthia G.
Publicat: (2018)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Publicat: (2021)

Diluted density. Urban planning in the Monterrey Metropolitan Area
per: Sheila Ferniza Quiroz, et al.
Publicat: (2021)

Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
per: Rodriguez Gonzalez, Claudia
Publicat: (2022)

Effect of end-clamping constraints on bending crashworthiness of square profiles
per: Estrada Barbosa, Quirino
Publicat: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
per: Rosel-Solis, Manuel-Javier
Publicat: (2019)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
per: Morelia De los Santos, et al.
Publicat: (2023)

Evaluation of supply chain performance a manufacturing industry approach
per: Avelar, Liliana
Publicat: (2019)

Review of concentration-dispersion through housing density and its effect on urban form
per: Jorge Javier Acosta Rendón
Publicat: (2018)

Maestría en Ingeniería en Manufactura. UACJ.
per: Coordinación General de Investigación y Posgrado, et al.
Publicat: (2018)

Factors and social relations in the urban garden “This is a square”, Madrid, Spain
per: Melina Dávila Garrido, et al.
Publicat: (2017)

Urban stories and representations in the cultural memory of the Main Square of Tunja, Colombia
per: Leonardo Enrique Osorio Salazar
Publicat: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
per: Omar Rosales Rivera, et al.
Publicat: (2024)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Publicat: (2021)

Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
per: Alba-Baena, Noé
Publicat: (2020)

Manifestaciones impropias en la publicación científica
per: Dania Silva Hernández, et al.
Publicat: (2015)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Publicat: (2022)

Determination of fat-free mass density and its components in older Hispanic adults by in vivo methods
Publicat: (2021)

Machinery Lean Manufacturing Tools for Improved Sustainability: The Mexican Maquiladora Industry Experience
per: García-Alcaraz, Jorge Luis
Publicat: (2022)

Methodology based on lean manufacturing for process improvement: 5CP23-19
per: Fabiola Hermosillo Villalobos, et al.
Publicat: (2023)

Methodology based on Lean Manufacturing for process improvement : 6CP23-13
per: Fabiola Hermosillo Villalobos, et al.
Publicat: (2023)

Plaza de Dinamarca. México, D. F. = Public Square of Dinamark. Mexico City /

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
per: Díaz-Acosta, Edgar
Publicat: (2018)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
per: Díaz-Acosta, Edgar
Publicat: (2018)