Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

La tecnología de fabricación de filamentos fundidos (FFF) se utiliza ampliamente en procesos de fabricación aditiva industriales y de escritorio . Esta tecnología implica fundir y extruir un filamento termoplástico a través de una boquilla calentada para crear capas fusionadas que forman un objeto t...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Balderrama Armendariz, Cesar Omar
Andre forfattere:	Garcia Pereyra, Rutilio, Maldonado-Macías, Aide Aracely, Eric, MacDonald, Aguilar-Duque, Julian I
Format:	Artículo
Sprog:	en_US
Udgivet:	2024
Fag:	Tecnología Filamentos fabricación info:eu-repo/classification/cti/7
Online adgang:	https://doi.org/10.1016/j.mfglet.2024.05.004 https://www.sciencedirect.com/science/article/abs/pii/S2213846324000427
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Optimización del trayecto de extrusor en la manufactura de elementos usando Fabricación por Filamento Fundido.
af: Aguilar Duque, Julián Israel
Udgivet: (2025)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Udgivet: (2020)

Geometric considerations for the 3D printing of components using fused filament fabrication
Udgivet: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Udgivet: (2021)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2019)

Additive manufacturing: Fused deposition modeling advances
af: Aguilar Duque, Julian Israel
Udgivet: (2018)

José Luis Ortega Lara explica la labor de los alumnos (Programa Imágenes)
af: Universidad Autónoma de Ciudad Juárez
Udgivet: (2016)

Optimizing the user experience of additive manufacturing products through material driven design
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2024)

Propuestas de clasificación del plagio y otros actos de conducta inapropiada en la elaboración de escritos académicos
af: Guadalupe, Esquivel
Udgivet: (2020)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Emotional salary: an alternative solution for labor performance improvement
af: Ana Karen Espinoza Saldívar, et al.
Udgivet: (2020)

Prototipo de una máquina para la fabricación de piezas con geometrías en dos dimensiones
af: Juan Carlos Juárez, et al.
Udgivet: (2016)

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2024)

Effect of Thermal Barrier Coating on the Thermal Stress of Gas Microturbine Blades and Nozzles
af: Tenango-Pirin, Oscar
Udgivet: (2020)

Análisis Especialista Seis Sigma y Cultura Organizacional en la relación con la Estrategia Seis Sigma y la Competitividad
af: Corona Cortez, Rosa Elba
Udgivet: (2017)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
af: Flores‑Hernández, Cynthia G.
Udgivet: (2018)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Udgivet: (2021)

Diluted density. Urban planning in the Monterrey Metropolitan Area
af: Sheila Ferniza Quiroz, et al.
Udgivet: (2021)

Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
af: Rodriguez Gonzalez, Claudia
Udgivet: (2022)

Effect of end-clamping constraints on bending crashworthiness of square profiles
af: Estrada Barbosa, Quirino
Udgivet: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
af: Rosel-Solis, Manuel-Javier
Udgivet: (2019)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
af: Morelia De los Santos, et al.
Udgivet: (2023)

Evaluation of supply chain performance a manufacturing industry approach
af: Avelar, Liliana
Udgivet: (2019)

Review of concentration-dispersion through housing density and its effect on urban form
af: Jorge Javier Acosta Rendón
Udgivet: (2018)

Maestría en Ingeniería en Manufactura. UACJ.
af: Coordinación General de Investigación y Posgrado, et al.
Udgivet: (2018)

Factors and social relations in the urban garden “This is a square”, Madrid, Spain
af: Melina Dávila Garrido, et al.
Udgivet: (2017)

Urban stories and representations in the cultural memory of the Main Square of Tunja, Colombia
af: Leonardo Enrique Osorio Salazar
Udgivet: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
af: Omar Rosales Rivera, et al.
Udgivet: (2024)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Udgivet: (2021)

Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
af: Alba-Baena, Noé
Udgivet: (2020)

Manifestaciones impropias en la publicación científica
af: Dania Silva Hernández, et al.
Udgivet: (2015)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Udgivet: (2022)

Determination of fat-free mass density and its components in older Hispanic adults by in vivo methods
Udgivet: (2021)

Machinery Lean Manufacturing Tools for Improved Sustainability: The Mexican Maquiladora Industry Experience
af: García-Alcaraz, Jorge Luis
Udgivet: (2022)

Methodology based on lean manufacturing for process improvement: 5CP23-19
af: Fabiola Hermosillo Villalobos, et al.
Udgivet: (2023)

Methodology based on Lean Manufacturing for process improvement : 6CP23-13
af: Fabiola Hermosillo Villalobos, et al.
Udgivet: (2023)

Plaza de Dinamarca. México, D. F. = Public Square of Dinamark. Mexico City /

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
af: Díaz-Acosta, Edgar
Udgivet: (2018)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
af: Díaz-Acosta, Edgar
Udgivet: (2018)