Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

La tecnología de fabricación de filamentos fundidos (FFF) se utiliza ampliamente en procesos de fabricación aditiva industriales y de escritorio . Esta tecnología implica fundir y extruir un filamento termoplástico a través de una boquilla calentada para crear capas fusionadas que forman un objeto t...

Spremljeno u:

Bibliografski detalji
Glavni autor:	Balderrama Armendariz, Cesar Omar
Daljnji autori:	Garcia Pereyra, Rutilio, Maldonado-Macías, Aide Aracely, Eric, MacDonald, Aguilar-Duque, Julian I
Format:	Artículo
Jezik:	en_US
Izdano:	2024
Teme:	Tecnología Filamentos fabricación info:eu-repo/classification/cti/7
Online pristup:	https://doi.org/10.1016/j.mfglet.2024.05.004 https://www.sciencedirect.com/science/article/abs/pii/S2213846324000427
Oznake:	Dodaj oznaku Bez oznaka, Budi prvi tko označuje ovaj zapis!

Similar Items

Optimización del trayecto de extrusor en la manufactura de elementos usando Fabricación por Filamento Fundido.
od: Aguilar Duque, Julián Israel
Izdano: (2025)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Izdano: (2020)

Geometric considerations for the 3D printing of components using fused filament fabrication
Izdano: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Izdano: (2021)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Izdano: (2019)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Izdano: (2018)

José Luis Ortega Lara explica la labor de los alumnos (Programa Imágenes)
od: Universidad Autónoma de Ciudad Juárez
Izdano: (2016)

Optimizing the user experience of additive manufacturing products through material driven design
od: Balderrama Armendariz, Cesar Omar
Izdano: (2024)

Propuestas de clasificación del plagio y otros actos de conducta inapropiada en la elaboración de escritos académicos
od: Guadalupe, Esquivel
Izdano: (2020)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Emotional salary: an alternative solution for labor performance improvement
od: Ana Karen Espinoza Saldívar, i dr.
Izdano: (2020)

Prototipo de una máquina para la fabricación de piezas con geometrías en dos dimensiones
od: Juan Carlos Juárez, i dr.
Izdano: (2016)

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process
od: Balderrama Armendariz, Cesar Omar
Izdano: (2024)

Effect of Thermal Barrier Coating on the Thermal Stress of Gas Microturbine Blades and Nozzles
od: Tenango-Pirin, Oscar
Izdano: (2020)

Análisis Especialista Seis Sigma y Cultura Organizacional en la relación con la Estrategia Seis Sigma y la Competitividad
od: Corona Cortez, Rosa Elba
Izdano: (2017)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
od: Flores‑Hernández, Cynthia G.
Izdano: (2018)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Izdano: (2021)

Diluted density. Urban planning in the Monterrey Metropolitan Area
od: Sheila Ferniza Quiroz, i dr.
Izdano: (2021)

Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
od: Rodriguez Gonzalez, Claudia
Izdano: (2022)

Effect of end-clamping constraints on bending crashworthiness of square profiles
od: Estrada Barbosa, Quirino
Izdano: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
od: Rosel-Solis, Manuel-Javier
Izdano: (2019)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
od: Morelia De los Santos, i dr.
Izdano: (2023)

Evaluation of supply chain performance a manufacturing industry approach
od: Avelar, Liliana
Izdano: (2019)

Review of concentration-dispersion through housing density and its effect on urban form
od: Jorge Javier Acosta Rendón
Izdano: (2018)

Maestría en Ingeniería en Manufactura. UACJ.
od: Coordinación General de Investigación y Posgrado, i dr.
Izdano: (2018)

Factors and social relations in the urban garden “This is a square”, Madrid, Spain
od: Melina Dávila Garrido, i dr.
Izdano: (2017)

Urban stories and representations in the cultural memory of the Main Square of Tunja, Colombia
od: Leonardo Enrique Osorio Salazar
Izdano: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
od: Omar Rosales Rivera, i dr.
Izdano: (2024)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Izdano: (2021)

Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
od: Alba-Baena, Noé
Izdano: (2020)

Manifestaciones impropias en la publicación científica
od: Dania Silva Hernández, i dr.
Izdano: (2015)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Izdano: (2022)

Determination of fat-free mass density and its components in older Hispanic adults by in vivo methods
Izdano: (2021)

Machinery Lean Manufacturing Tools for Improved Sustainability: The Mexican Maquiladora Industry Experience
od: García-Alcaraz, Jorge Luis
Izdano: (2022)

Methodology based on lean manufacturing for process improvement: 5CP23-19
od: Fabiola Hermosillo Villalobos, i dr.
Izdano: (2023)

Methodology based on Lean Manufacturing for process improvement : 6CP23-13
od: Fabiola Hermosillo Villalobos, i dr.
Izdano: (2023)

Plaza de Dinamarca. México, D. F. = Public Square of Dinamark. Mexico City /

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
od: Díaz-Acosta, Edgar
Izdano: (2018)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
od: Díaz-Acosta, Edgar
Izdano: (2018)