Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing

La tecnología de fabricación de filamentos fundidos (FFF) se utiliza ampliamente en procesos de fabricación aditiva industriales y de escritorio . Esta tecnología implica fundir y extruir un filamento termoplástico a través de una boquilla calentada para crear capas fusionadas que forman un objeto t...

Kaydedildi:

Detaylı Bibliyografya
Yazar:	Balderrama Armendariz, Cesar Omar
Diğer Yazarlar:	Garcia Pereyra, Rutilio, Maldonado-Macías, Aide Aracely, Eric, MacDonald, Aguilar-Duque, Julian I
Materyal Türü:	Artículo
Dil:	en_US
Baskı/Yayın Bilgisi:	2024
Konular:	Tecnología Filamentos fabricación info:eu-repo/classification/cti/7
Online Erişim:	https://doi.org/10.1016/j.mfglet.2024.05.004 https://www.sciencedirect.com/science/article/abs/pii/S2213846324000427
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

Optimización del trayecto de extrusor en la manufactura de elementos usando Fabricación por Filamento Fundido.
Yazar:: Aguilar Duque, Julián Israel
Baskı/Yayın Bilgisi: (2025)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Baskı/Yayın Bilgisi: (2020)

Geometric considerations for the 3D printing of components using fused filament fabrication
Baskı/Yayın Bilgisi: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Baskı/Yayın Bilgisi: (2021)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2019)

Additive manufacturing: Fused deposition modeling advances
Yazar:: Aguilar Duque, Julian Israel
Baskı/Yayın Bilgisi: (2018)

José Luis Ortega Lara explica la labor de los alumnos (Programa Imágenes)
Yazar:: Universidad Autónoma de Ciudad Juárez
Baskı/Yayın Bilgisi: (2016)

Optimizing the user experience of additive manufacturing products through material driven design
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2024)

Propuestas de clasificación del plagio y otros actos de conducta inapropiada en la elaboración de escritos académicos
Yazar:: Guadalupe, Esquivel
Baskı/Yayın Bilgisi: (2020)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Emotional salary: an alternative solution for labor performance improvement
Yazar:: Ana Karen Espinoza Saldívar, ve diğerleri
Baskı/Yayın Bilgisi: (2020)

Prototipo de una máquina para la fabricación de piezas con geometrías en dos dimensiones
Yazar:: Juan Carlos Juárez, ve diğerleri
Baskı/Yayın Bilgisi: (2016)

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2024)

Effect of Thermal Barrier Coating on the Thermal Stress of Gas Microturbine Blades and Nozzles
Yazar:: Tenango-Pirin, Oscar
Baskı/Yayın Bilgisi: (2020)

Análisis Especialista Seis Sigma y Cultura Organizacional en la relación con la Estrategia Seis Sigma y la Competitividad
Yazar:: Corona Cortez, Rosa Elba
Baskı/Yayın Bilgisi: (2017)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
Yazar:: Flores‑Hernández, Cynthia G.
Baskı/Yayın Bilgisi: (2018)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Baskı/Yayın Bilgisi: (2021)

Diluted density. Urban planning in the Monterrey Metropolitan Area
Yazar:: Sheila Ferniza Quiroz, ve diğerleri
Baskı/Yayın Bilgisi: (2021)

Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
Yazar:: Rodriguez Gonzalez, Claudia
Baskı/Yayın Bilgisi: (2022)

Effect of end-clamping constraints on bending crashworthiness of square profiles
Yazar:: Estrada Barbosa, Quirino
Baskı/Yayın Bilgisi: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Yazar:: Rosel-Solis, Manuel-Javier
Baskı/Yayın Bilgisi: (2019)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
Yazar:: Morelia De los Santos, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Evaluation of supply chain performance a manufacturing industry approach
Yazar:: Avelar, Liliana
Baskı/Yayın Bilgisi: (2019)

Review of concentration-dispersion through housing density and its effect on urban form
Yazar:: Jorge Javier Acosta Rendón
Baskı/Yayın Bilgisi: (2018)

Maestría en Ingeniería en Manufactura. UACJ.
Yazar:: Coordinación General de Investigación y Posgrado, ve diğerleri
Baskı/Yayın Bilgisi: (2018)

Factors and social relations in the urban garden “This is a square”, Madrid, Spain
Yazar:: Melina Dávila Garrido, ve diğerleri
Baskı/Yayın Bilgisi: (2017)

Urban stories and representations in the cultural memory of the Main Square of Tunja, Colombia
Yazar:: Leonardo Enrique Osorio Salazar
Baskı/Yayın Bilgisi: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
Yazar:: Omar Rosales Rivera, ve diğerleri
Baskı/Yayın Bilgisi: (2024)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Baskı/Yayın Bilgisi: (2021)

Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
Yazar:: Alba-Baena, Noé
Baskı/Yayın Bilgisi: (2020)

Manifestaciones impropias en la publicación científica
Yazar:: Dania Silva Hernández, ve diğerleri
Baskı/Yayın Bilgisi: (2015)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Baskı/Yayın Bilgisi: (2022)

Determination of fat-free mass density and its components in older Hispanic adults by in vivo methods
Baskı/Yayın Bilgisi: (2021)

Machinery Lean Manufacturing Tools for Improved Sustainability: The Mexican Maquiladora Industry Experience
Yazar:: García-Alcaraz, Jorge Luis
Baskı/Yayın Bilgisi: (2022)

Methodology based on lean manufacturing for process improvement: 5CP23-19
Yazar:: Fabiola Hermosillo Villalobos, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Methodology based on Lean Manufacturing for process improvement : 6CP23-13
Yazar:: Fabiola Hermosillo Villalobos, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Plaza de Dinamarca. México, D. F. = Public Square of Dinamark. Mexico City /

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
Yazar:: Díaz-Acosta, Edgar
Baskı/Yayın Bilgisi: (2018)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
Yazar:: Díaz-Acosta, Edgar
Baskı/Yayın Bilgisi: (2018)