Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Descripció completa

Guardat en:

Dades bibliogràfiques
Autor principal:	Rosel-Solis, Manuel-Javier
Altres autors:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Format:	Artículo
Idioma:	en_US
Publicat:	2019
Matèries:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Accés en línia:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Torsion analysis of the anisotropic behavior of FDM technology
per: Balderrama Armendariz, Cesar Omar
Publicat: (2018)

Additive manufacturing: Fused deposition modeling advances
per: Aguilar Duque, Julian Israel
Publicat: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
per: Balderrama Armendariz, Cesar Omar
Publicat: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Publicat: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
per: Estrada, Quirino
Publicat: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Publicat: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Publicat: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
per: Valero Galván, José
Publicat: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Publicat: (2024)

Self-locking module for automatic tool change
per: Dr. Carlos Sánchez López, et al.
Publicat: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
per: Núñez-Gastélum, José Alberto
Publicat: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
per: Núñez-Gastélum, José Alberto
Publicat: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
per: Méndez-González, Luis Carlos
Publicat: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
per: Valero Galván, José
Publicat: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
per: Talamantes Moreno, Edwin Fabián
Publicat: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Publicat: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Publicat: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
per: Castro Carmona, Javier Servando
Publicat: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
per: Maximino Matus Ruiz
Publicat: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Publicat: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Publicat: (2024)

Mathematical journal as strategy to develop skills in learning addition
per: Claudia Elsa Lazo Olivas, et al.
Publicat: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
per: Becerril-Silva, M.
Publicat: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Publicat: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
per: Sanchez Dena, Oswaldo
Publicat: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
per: Mota , Maria de la Luz
Publicat: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
per: Mota, Maria de la Luz
Publicat: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Publicat: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
per: Garay Reyes, Carlos Gamaliel
Publicat: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
per: Olivas Armendariz, Imelda
Publicat: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
per: Garza-Hernández, R.
Publicat: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Publicat: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
per: Flores‑Hernández, Cynthia G.
Publicat: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
per: Julio César Galvis Chacón, et al.
Publicat: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
per: Rangel Peniche, Diana Beatriz
Publicat: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Publicat: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
per: Valero Galván, José
Publicat: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Publicat: (2021)