Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Disgrifiad llawn

Wedi'i Gadw mewn:

Manylion Llyfryddiaeth
Prif Awdur:	Rosel-Solis, Manuel-Javier
Awduron Eraill:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Fformat:	Artículo
Iaith:	en_US
Cyhoeddwyd:	2019
Pynciau:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Mynediad Ar-lein:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Tagiau:	Ychwanegu Tag Dim Tagiau, Byddwch y cyntaf i dagio'r cofnod hwn!

Eitemau Tebyg

Torsion analysis of the anisotropic behavior of FDM technology
gan: Balderrama Armendariz, Cesar Omar
Cyhoeddwyd: (2018)

Additive manufacturing: Fused deposition modeling advances
gan: Aguilar Duque, Julian Israel
Cyhoeddwyd: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
gan: Arias-Nava, Elias H.
Cyhoeddwyd: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
gan: Arias-Nava, Elias H.
Cyhoeddwyd: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
gan: Balderrama Armendariz, Cesar Omar
Cyhoeddwyd: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Cyhoeddwyd: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
gan: Estrada, Quirino
Cyhoeddwyd: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Cyhoeddwyd: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Cyhoeddwyd: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
gan: Valero Galván, José
Cyhoeddwyd: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Cyhoeddwyd: (2024)

Self-locking module for automatic tool change
gan: Dr. Carlos Sánchez López, et al.
Cyhoeddwyd: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
gan: Núñez-Gastélum, José Alberto
Cyhoeddwyd: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
gan: Núñez-Gastélum, José Alberto
Cyhoeddwyd: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
gan: Méndez-González, Luis Carlos
Cyhoeddwyd: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
gan: Valero Galván, José
Cyhoeddwyd: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
gan: Talamantes Moreno, Edwin Fabián
Cyhoeddwyd: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Cyhoeddwyd: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Cyhoeddwyd: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
gan: Castro Carmona, Javier Servando
Cyhoeddwyd: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
gan: Maximino Matus Ruiz
Cyhoeddwyd: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Cyhoeddwyd: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Cyhoeddwyd: (2024)

Mathematical journal as strategy to develop skills in learning addition
gan: Claudia Elsa Lazo Olivas, et al.
Cyhoeddwyd: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
gan: Becerril-Silva, M.
Cyhoeddwyd: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Cyhoeddwyd: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
gan: Sanchez Dena, Oswaldo
Cyhoeddwyd: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
gan: Mota , Maria de la Luz
Cyhoeddwyd: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
gan: Mota, Maria de la Luz
Cyhoeddwyd: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Cyhoeddwyd: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
gan: Garay Reyes, Carlos Gamaliel
Cyhoeddwyd: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
gan: Olivas Armendariz, Imelda
Cyhoeddwyd: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
gan: Garza-Hernández, R.
Cyhoeddwyd: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Cyhoeddwyd: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
gan: Flores‑Hernández, Cynthia G.
Cyhoeddwyd: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
gan: Julio César Galvis Chacón, et al.
Cyhoeddwyd: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
gan: Rangel Peniche, Diana Beatriz
Cyhoeddwyd: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Cyhoeddwyd: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
gan: Valero Galván, José
Cyhoeddwyd: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Cyhoeddwyd: (2021)