Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Shranjeno v:

Bibliografske podrobnosti
Glavni avtor:	Rosel-Solis, Manuel-Javier
Drugi avtorji:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Format:	Artículo
Jezik:	en_US
Izdano:	2019
Teme:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Online dostop:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Torsion analysis of the anisotropic behavior of FDM technology
od: Balderrama Armendariz, Cesar Omar
Izdano: (2018)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Izdano: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Izdano: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Izdano: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
od: Estrada, Quirino
Izdano: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Izdano: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Izdano: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Valero Galván, José
Izdano: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Izdano: (2024)

Self-locking module for automatic tool change
od: Dr. Carlos Sánchez López, et al.
Izdano: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Núñez-Gastélum, José Alberto
Izdano: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Núñez-Gastélum, José Alberto
Izdano: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
od: Méndez-González, Luis Carlos
Izdano: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
od: Valero Galván, José
Izdano: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
od: Talamantes Moreno, Edwin Fabián
Izdano: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Izdano: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Izdano: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Izdano: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
od: Maximino Matus Ruiz
Izdano: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Izdano: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Izdano: (2024)

Mathematical journal as strategy to develop skills in learning addition
od: Claudia Elsa Lazo Olivas, et al.
Izdano: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
od: Becerril-Silva, M.
Izdano: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Izdano: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
od: Sanchez Dena, Oswaldo
Izdano: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
od: Mota , Maria de la Luz
Izdano: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
od: Mota, Maria de la Luz
Izdano: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Izdano: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
od: Garay Reyes, Carlos Gamaliel
Izdano: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
od: Olivas Armendariz, Imelda
Izdano: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
od: Garza-Hernández, R.
Izdano: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Izdano: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
od: Flores‑Hernández, Cynthia G.
Izdano: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
od: Julio César Galvis Chacón, et al.
Izdano: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
od: Rangel Peniche, Diana Beatriz
Izdano: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Izdano: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
od: Valero Galván, José
Izdano: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Izdano: (2021)