Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả chính:	Rosel-Solis, Manuel-Javier
Tác giả khác:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Định dạng:	Artículo
Ngôn ngữ:	en_US
Được phát hành:	2019
Những chủ đề:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Truy cập trực tuyến:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

Torsion analysis of the anisotropic behavior of FDM technology
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2018)

Additive manufacturing: Fused deposition modeling advances
Bằng: Aguilar Duque, Julian Israel
Được phát hành: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Được phát hành: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
Bằng: Estrada, Quirino
Được phát hành: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Được phát hành: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Được phát hành: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Bằng: Valero Galván, José
Được phát hành: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Được phát hành: (2024)

Self-locking module for automatic tool change
Bằng: Dr. Carlos Sánchez López, et al.
Được phát hành: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Bằng: Núñez-Gastélum, José Alberto
Được phát hành: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Bằng: Núñez-Gastélum, José Alberto
Được phát hành: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
Bằng: Méndez-González, Luis Carlos
Được phát hành: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
Bằng: Valero Galván, José
Được phát hành: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
Bằng: Talamantes Moreno, Edwin Fabián
Được phát hành: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Được phát hành: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Được phát hành: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Bằng: Castro Carmona, Javier Servando
Được phát hành: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Bằng: Maximino Matus Ruiz
Được phát hành: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Được phát hành: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Được phát hành: (2024)

Mathematical journal as strategy to develop skills in learning addition
Bằng: Claudia Elsa Lazo Olivas, et al.
Được phát hành: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Bằng: Becerril-Silva, M.
Được phát hành: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Được phát hành: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
Bằng: Sanchez Dena, Oswaldo
Được phát hành: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
Bằng: Mota , Maria de la Luz
Được phát hành: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
Bằng: Mota, Maria de la Luz
Được phát hành: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Được phát hành: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
Bằng: Garay Reyes, Carlos Gamaliel
Được phát hành: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
Bằng: Olivas Armendariz, Imelda
Được phát hành: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Bằng: Garza-Hernández, R.
Được phát hành: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Được phát hành: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
Bằng: Flores‑Hernández, Cynthia G.
Được phát hành: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
Bằng: Julio César Galvis Chacón, et al.
Được phát hành: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
Bằng: Rangel Peniche, Diana Beatriz
Được phát hành: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Được phát hành: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
Bằng: Valero Galván, José
Được phát hành: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Được phát hành: (2021)