An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes

In the present work, fabrication of metal matrix composite of aluminium alloy A380 reinforced with 0.5, 1 and 1.5 weight percentages of nano boron carbide through mechanical stirring and ultrasonic treatment processes. Scanning Electron Microscopy (SEM), Back Scattered Electron Detector (BSE) and en...

Kaydedildi:

Detaylı Bibliyografya
Diğer Yazarlar:	Singh, Jaivir, Alba-Baena, Noé, sharma, vishal, Trehan, Rajeev
Materyal Türü:	Artículo
Dil:	English
Baskı/Yayın Bilgisi:	2021
Konular:	nanocomposites Aluminium A380 Boron Carbide Ultrasonic Treatment Mechanical Stirring Wear info:eu-repo/classification/cti/7
Online Erişim:	https://doi.org/10.1007/s12046-021-01760-8 https://link.springer.com/article/10.1007/s12046-021-01760-8#citeas
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

Educational Module for Ultrasonic Bearing Inspection
Yazar:: Reynoso Jardón, elva
Baskı/Yayın Bilgisi: (2024)

Effectiveness of behavioral activation for depression treatment in medical students: Study protocol for a quasi-experimental design
Baskı/Yayın Bilgisi: (2020)

Electronic states and metallic character of carbide Co/MoS2 catalytic interface
Baskı/Yayın Bilgisi: (2021)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
Yazar:: Díaz-Acosta, Edgar
Baskı/Yayın Bilgisi: (2018)

1. Modeling electrochemical impedance spectroscopy results of Cu andThiosemicarbizide−Boron Nitride nano-sheets electrodes in 3.5wt% NaCl solution, based on an electrochemical reaction mechanism
Baskı/Yayın Bilgisi: (2023)

Study of the Influence of the Molecular Weight of the Polymer Used as a Coating on Magnetite Nanoparticles
Yazar:: Chapa, Christian
Baskı/Yayın Bilgisi: (2018)

Turbulent cylinder-stirred flow heat and momentum transfer research in batch operated single-phase square reactor
Baskı/Yayın Bilgisi: (2022)

Polymer Nanocomposites Based on Nano Alumina
Yazar:: Chapa, Christian
Baskı/Yayın Bilgisi: (2024)

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718
Baskı/Yayın Bilgisi: (2022)

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
Yazar:: Díaz-Acosta, Edgar
Baskı/Yayın Bilgisi: (2018)

Pancreatic Cancer Treatment by Nab-Paclitaxel with Gemcitabine Combination
Yazar:: Chapa, Christian
Baskı/Yayın Bilgisi: (2022)

Sustainable Zeolite–Silver Nanocomposites via Green Methods for Water Contaminant Mitigation and Modeling Approaches
Yazar:: Reyes-López, Simón Yobanny
Baskı/Yayın Bilgisi: (2024)

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments
Yazar:: Castro Carmona, Javier Servando
Baskı/Yayın Bilgisi: (2020)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
Yazar:: Paola Lizeth Orquiz Avila, ve diğerleri
Baskı/Yayın Bilgisi: (2024)

Equilibrium, kinetic and optimization studies for the adsorption of tartrazine in water onto activated carbon from pecan nut shells
Yazar:: Torres-Pérez, Jonatan
Baskı/Yayın Bilgisi: (2018)

INITIAL SEED WEIGHT AND SCARIFICATION AFFECT in vitro GERMINATION OF Echinocactus parryi (Engelm.) Gg EL PESO INICIAL DE SEMILLAS Y LA ESCARIFICACIÓN AFECTAN LA GERMINACIÓN in vitro DE Echinocactus parryi (Engelm.)
Yazar:: Osuna Avila, Pedro
Baskı/Yayın Bilgisi: (2022)

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain
Baskı/Yayın Bilgisi: (2020)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
Yazar:: Rivas Caceres, Raymundo Rene
Baskı/Yayın Bilgisi: (2020)

Antibacterial Properties of Grape Seed Extract-Enriched Cellulose Hydrogels for Potential Dental Application: In Vitro Assay, Cytocompatibility, and Biocompatibility
Yazar:: Tovar Carrillo, Karla Lizette
Baskı/Yayın Bilgisi: (2024)

Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
Yazar:: Espinosa Cristóbal, León Francisco
Baskı/Yayın Bilgisi: (2018)

Electrochemical Energy Storage Device Based on the Removal of Organic Contaminants in Wastewater from Ciudad Juárez
Yazar:: Mónica Galicia García
Baskı/Yayın Bilgisi: (2024)

Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
Yazar:: Mariaca, Yahir De Jesus
Baskı/Yayın Bilgisi: (2018)

Stress-Based Weibull Method to Select a Ball Bearing and Determine Its Actual Reliability
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Transitional points in constructing the preimage concept in linear algebra
Baskı/Yayın Bilgisi: (2021)

Articulated mechanism in aerial robots for cargo transport: 7CP24-23
Yazar:: Héctor Aarón Mani Lazos, ve diğerleri
Baskı/Yayın Bilgisi: (2024)

Structural and magnetic behavior of oxidized and reduced fe doped LiNbO3 powders
Yazar:: Fierro-Ruiz, César D.
Baskı/Yayın Bilgisi: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Weibull Reliability Methodology for Ball Bearing Design Based on Hertz Stress With Focus on Industry 4.0
Baskı/Yayın Bilgisi: (2021)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

The Squirrel-Cage Induction Motor Model and Its Parameter Identification Via Steady and Dynamic Tests
Yazar:: Morfin, Onofre
Baskı/Yayın Bilgisi: (2018)

Los convenios interinstitucionales: mecanismos de colaboración para crear impacto social en la comunidad universitaria
Yazar:: Dra. Rosa María Cuellar Gutiérrez, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Physicochemical properties of chitosan–magnetite nanocomposites obtained with different pH
Yazar:: Chapa, Christian
Baskı/Yayın Bilgisi: (2021)

Fog Computing and Industry 4.0 for Newsvendor Inventory Model Using Attention Mechanism and Gated Recurrent Unit
Yazar:: Avelar, Liliana
Baskı/Yayın Bilgisi: (2024)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Baskı/Yayın Bilgisi: (2022)

Ganoderma tuberculosum Liquid Culture With Vineyard Pruning Extracts for Bioactive Composite Production With Antiproliferative Activity
Baskı/Yayın Bilgisi: (2024)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
Yazar:: Morelia De los Santos, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Radial Basis Function Neural Network for the Evaluation of Image Color Quality Shown on Liquid Crystal Displays
Baskı/Yayın Bilgisi: (2021)

Unidad de Cirugía Experimental.
Yazar:: Universidad Autónoma de Ciudad Juárez
Baskı/Yayın Bilgisi: (2016)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2019)