Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Deskribapen osoa

Gorde:

Xehetasun bibliografikoak
Egile nagusia:	Rosel-Solis, Manuel-Javier
Beste egile batzuk:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Formatua:	Artículo
Hizkuntza:	en_US
Argitaratua:	2019
Gaiak:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Sarrera elektronikoa:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Etiketak:	Etiketa erantsi Etiketarik gabe, Izan zaitez lehena erregistro honi etiketa jartzen!

Antzeko izenburuak

Torsion analysis of the anisotropic behavior of FDM technology
nork: Balderrama Armendariz, Cesar Omar
Argitaratua: (2018)

Additive manufacturing: Fused deposition modeling advances
nork: Aguilar Duque, Julian Israel
Argitaratua: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
nork: Arias-Nava, Elias H.
Argitaratua: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
nork: Arias-Nava, Elias H.
Argitaratua: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
nork: Balderrama Armendariz, Cesar Omar
Argitaratua: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Argitaratua: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
nork: Estrada, Quirino
Argitaratua: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Argitaratua: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Argitaratua: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
nork: Valero Galván, José
Argitaratua: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Argitaratua: (2024)

Self-locking module for automatic tool change
nork: Dr. Carlos Sánchez López, et al.
Argitaratua: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
nork: Núñez-Gastélum, José Alberto
Argitaratua: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
nork: Núñez-Gastélum, José Alberto
Argitaratua: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
nork: Méndez-González, Luis Carlos
Argitaratua: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
nork: Valero Galván, José
Argitaratua: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
nork: Talamantes Moreno, Edwin Fabián
Argitaratua: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Argitaratua: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Argitaratua: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
nork: Castro Carmona, Javier Servando
Argitaratua: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
nork: Maximino Matus Ruiz
Argitaratua: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Argitaratua: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Argitaratua: (2024)

Mathematical journal as strategy to develop skills in learning addition
nork: Claudia Elsa Lazo Olivas, et al.
Argitaratua: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
nork: Becerril-Silva, M.
Argitaratua: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Argitaratua: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
nork: Sanchez Dena, Oswaldo
Argitaratua: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
nork: Mota , Maria de la Luz
Argitaratua: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
nork: Mota, Maria de la Luz
Argitaratua: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Argitaratua: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
nork: Garay Reyes, Carlos Gamaliel
Argitaratua: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
nork: Olivas Armendariz, Imelda
Argitaratua: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
nork: Garza-Hernández, R.
Argitaratua: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Argitaratua: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
nork: Flores‑Hernández, Cynthia G.
Argitaratua: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
nork: Julio César Galvis Chacón, et al.
Argitaratua: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
nork: Rangel Peniche, Diana Beatriz
Argitaratua: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Argitaratua: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
nork: Valero Galván, José
Argitaratua: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Argitaratua: (2021)