Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Szczegółowa specyfikacja

Zapisane w:

Opis bibliograficzny
1. autor:	Rosel-Solis, Manuel-Javier
Kolejni autorzy:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Format:	Artículo
Język:	en_US
Wydane:	2019
Hasła przedmiotowe:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Dostęp online:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Etykiety:	Dodaj etykietę Nie ma etykietki, Dołącz pierwszą etykiete!

Podobne zapisy

Torsion analysis of the anisotropic behavior of FDM technology
od: Balderrama Armendariz, Cesar Omar
Wydane: (2018)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Wydane: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Wydane: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Wydane: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Wydane: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Wydane: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
od: Estrada, Quirino
Wydane: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Wydane: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Wydane: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Valero Galván, José
Wydane: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Wydane: (2024)

Self-locking module for automatic tool change
od: Dr. Carlos Sánchez López, i wsp.
Wydane: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Núñez-Gastélum, José Alberto
Wydane: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
od: Núñez-Gastélum, José Alberto
Wydane: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
od: Méndez-González, Luis Carlos
Wydane: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
od: Valero Galván, José
Wydane: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
od: Talamantes Moreno, Edwin Fabián
Wydane: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Wydane: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Wydane: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Wydane: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
od: Maximino Matus Ruiz
Wydane: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Wydane: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Wydane: (2024)

Mathematical journal as strategy to develop skills in learning addition
od: Claudia Elsa Lazo Olivas, i wsp.
Wydane: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
od: Becerril-Silva, M.
Wydane: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Wydane: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
od: Sanchez Dena, Oswaldo
Wydane: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
od: Mota , Maria de la Luz
Wydane: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
od: Mota, Maria de la Luz
Wydane: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Wydane: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
od: Garay Reyes, Carlos Gamaliel
Wydane: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
od: Olivas Armendariz, Imelda
Wydane: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
od: Garza-Hernández, R.
Wydane: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Wydane: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
od: Flores‑Hernández, Cynthia G.
Wydane: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
od: Julio César Galvis Chacón, i wsp.
Wydane: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
od: Rangel Peniche, Diana Beatriz
Wydane: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Wydane: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
od: Valero Galván, José
Wydane: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Wydane: (2021)