Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing

Additive manufacturing represents an alternative that offers great advantages in small-scale production, high level of customization and ease of building complex geometries. However, rapid prototyping parts present mechanical limitations that prevent their use in applications that require greate...

Полное описание

Сохранить в:

Библиографические подробности
Главный автор:	Rosel-Solis, Manuel-Javier
Другие авторы:	Molina Salazar, Javier, Davalos Ramirez, Jose Omar, Pimentel Mendoza, Alex Bernardo, Vega, Yuridia
Формат:	Artículo
Язык:	en_US
Опубликовано:	2019
Предметы:	additive manufacturing composite materials bending tests fused deposition modeling ABS delamination info:eu-repo/classification/cti/7
Online-ссылка:	http://dx.doi.org/10.6036/8980 https://www.revistadyna.com/search/analysis-of-characteristics-of-composite-materials-built-on-abs-cores-prepared-by-additive-manufactu
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Torsion analysis of the anisotropic behavior of FDM technology
по: Balderrama Armendariz, Cesar Omar
Опубликовано: (2018)

Additive manufacturing: Fused deposition modeling advances
по: Aguilar Duque, Julian Israel
Опубликовано: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
по: Arias-Nava, Elias H.
Опубликовано: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
по: Arias-Nava, Elias H.
Опубликовано: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
по: Balderrama Armendariz, Cesar Omar
Опубликовано: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Опубликовано: (2020)

Energy absorption of single and multi-cell profiles under bending load considering damage evolution
по: Estrada, Quirino
Опубликовано: (2018)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Опубликовано: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Опубликовано: (2021)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
по: Valero Galván, José
Опубликовано: (2018)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Опубликовано: (2024)

Self-locking module for automatic tool change
по: Dr. Carlos Sánchez López, et al.
Опубликовано: (2024)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
по: Núñez-Gastélum, José Alberto
Опубликовано: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
по: Núñez-Gastélum, José Alberto
Опубликовано: (2018)

An Additive Chen Distribution with Applications to Lifetime Data
по: Méndez-González, Luis Carlos
Опубликовано: (2023)

Seed Characteristics and Nutritional Composition of Pine Nut from Five Populations of P. cembroides from the States of Hidalgo and Chihuahua, Mexico
по: Valero Galván, José
Опубликовано: (2019)

Diseño e impresión 3D en polímeros PLA y ABS de una prótesis mecánica con cierre voluntario a 2 tiempos para amputación de mano
по: Talamantes Moreno, Edwin Fabián
Опубликовано: (2019)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Опубликовано: (2021)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Опубликовано: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
по: Castro Carmona, Javier Servando
Опубликовано: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
по: Maximino Matus Ruiz
Опубликовано: (2023)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Опубликовано: (2024)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material fororthodontic applications
Опубликовано: (2024)

Mathematical journal as strategy to develop skills in learning addition
по: Claudia Elsa Lazo Olivas, et al.
Опубликовано: (2025)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
по: Becerril-Silva, M.
Опубликовано: (2018)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Опубликовано: (2022)

Determination of the Chemical Composition of Lithium Niobate Powders
по: Sanchez Dena, Oswaldo
Опубликовано: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
по: Mota , Maria de la Luz
Опубликовано: (2019)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
по: Mota, Maria de la Luz
Опубликовано: (2021)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Опубликовано: (2020)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
по: Garay Reyes, Carlos Gamaliel
Опубликовано: (2019)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
по: Olivas Armendariz, Imelda
Опубликовано: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
по: Garza-Hernández, R.
Опубликовано: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Опубликовано: (2020)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
по: Flores‑Hernández, Cynthia G.
Опубликовано: (2018)

Optimization of laminated composite materials configuration using neural networks and simulated annealing
по: Julio César Galvis Chacón, et al.
Опубликовано: (2024)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
по: Rangel Peniche, Diana Beatriz
Опубликовано: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Опубликовано: (2020)

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition, Phytochemical Content, and Antioxidant Activity
по: Valero Galván, José
Опубликовано: (2021)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Опубликовано: (2021)